If the idea of getting up early on Saturday morning to commune with your landscape is an idea that you cherish, but don’t dare pursue because of the high level of maintenance required, you may be
Spring Cleaning Your Air Conditioner
Spring is a time of beginnings. You get a chance to start over, to try something new and to get your air conditioner ready for the hot summer to come. It might not be as romantic as the budding of trees and blooming of flowers, but having your air conditioner in tip-top shape is arguably far more useful.
When you start your spring clean, don’t forget your air conditioner. In just a few minutes, you can improve its efficiency while helping it continue to run well for years to come.
First, A Basic Explanation of Air Conditioning Technology
Your air conditioner isn’t magic, but it’s pretty close. These devices were actually invented in the early 1900s as a way to reduce indoor humidity in paper plants. It just so happened they have a side effect that we rely on even today.
Air conditioning systems depend on the expansion and contraction of gasses to pull moisture out of the air by cooling it down. This is basic physics at work — warm air holds more water, cool air holds less.
When air is pulled into your air handler (for many, this is a furnace) through your warm air return, it’s forced over a tent-shaped coil that uses refrigerant to cool the air as it passes. A blower then blows that cooled air back into the house.
So What Does the Outside Condenser Do?
The air conditioning condenser that most people consider to be “the air conditioner” is actually a giant heatsink. See, when the air is cooled inside your air handler, the refrigerant is what’s absorbing most of the heat. It then gets pumped to the condenser, where the heat collected inside your house is released to the environment.
It’s really a pretty simple idea that has made a huge change to how we live, play and work.
Your Air Conditioner Spring Cleaning Checklist
There’s no time like spring to do a little air conditioner tune-up. A lot of the heavy lifting will have to be performed by HVAC professionals, but there are things you can do to keep your system running longer as a homeowner. Generally, these items should be done at least once in the spring before you start using the A/C and again in the fall when you’re ready to put it away for the year.
Change your furnace filter. Whether it’s on the ceiling, on the floor or inside your furnace or air handler, a clean filter is a filter that can let the most air through for cooling. And the easier it is for the system to pull air in and cool it, the more comfortable you’ll be with the least amount of cost. Investing in an electrostatic filter that you can wash and reuse is a smart move for the long term.
Flush your condensation line. There’s a pipe or tube that comes out of your furnace or air handler and runs to a drain somewhere. This is the condensation line. All the moisture your system is pulling out of that warm air has to go somewhere, you know? That somewhere is a pan that empties via this tube. Just open it up from the top (which tube it is should be obvious, but if you can’t find it, ask your HVAC professional), slowly pour in about a cup of vinegar or bleach. If the liquid moves, you’re gold. If not, you may need to spend some time investigating the issue. More often than not, it’s algae growth in the tube or mineral deposits, both things you can flush out, but require some patience to remove.
Clean your a-coil. That tent shaped coil mentioned above is called the “evaporator coil” or the “a-coil.” It can get dirty, which makes it a lot less efficient at removing moisture and cooling the air. If you feel brave, and you’re careful, you can wipe the coils clean or use a shop vac. They’re very similar to the coils on the back of your refrigerator, treat them the exact same way.
Comb the fins on the condenser. If you look closely at your outside condenser, you’ll notice that the part that’s inside the cage is made up of a whole bunch of teeny fins. These little guys can get damaged by accident, causing them to be less efficient because they’re not really in an optimal configuration anymore. All you need to fix this is a fin comb. This simple device lets you straighten bent fins, restoring your unit to its former glory.
Spray the condenser down. Last, but far from least, you’ll want to spray your air conditioner’s condenser down with a hose. Start by wetting all the fins with a garden sprayer, then go back around and spend some time slowly flushing out the dirt, one section at a time, working top to bottom.
Ready For An A/C Tune-Up?
If spring cleaning your air conditioner isn’t getting the results you’re looking for, it may be time to get an HVAC pro out to give it a once-over. But where can you find one that you can really trust, though? Your real estate agent has already recommended their favorite home pros, all you need to do give me a call at 417-365-1212!